User Manual

21
2. Status
Shows status information about the radio link, as shown in Figure
2-3-6.
Figure 2-3-6
z Associated BSSID – means the wireless client is connected to an
access point. BSSID is shown in the form of six hex digits which is
the MAC address of the access point.
z Scanning – means the wireless client is searching for an available
access point in infrastructure mode.
z Disconnected – means there are no access points or other
wireless clients (if communicating in Ad-hoc mode), or the PC Card
is unplugged in your computer.
Current Tx Rate (Mbits/s)
The data speed that wireless client is transmitting.
Current Channel
The operation radio frequency channel that wireless client is using in
infrastructure mode. In infrastructure mode, wireless client will always
go the same channel as their Access Point.