User Manual

22
Throughput (Bytes/sec)
z Tx: shows the outgoing (sent) data speed.
z Rx: shows the incoming (received) data speed.
Link Quality
In infrastructure mode, this bar displays the transmission quality
between a WLAN station (Access Point) and Wireless LAN PC Card.
In Peer-to-Peer mode (Ad-Hoc), this bar displays the link quality
between two Wireless LAN PC Cards.
Signal Strength
This bar displays the signal strength level. The higher bar is, the more
powerful radio signal is received by the PC Card.
Disable/Enable Radio
This button is used like a switch that allows users to turn off the
wireless radio by clicking this button and turn it on again.
Rescan
The radio will rescan all available channels by pressing this button.
You can push this button to rescan the channels for better link quality
when the link quality is poor.
3. Configuration
Make configuration changes by specifying the proper configuration
parameters on this configuration tab as shown in Figure 2-3-7.
Figure 2-3-7