User Manual

33
3-3 Checking and Adding TCP/IP
TCP/IP is the protocol you use to connect to the Internet and wide-area
networks. If you want to connect to Internet, you need to set up TCP/IP
protocol.
1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for
Microsoft Networks.
2. Select Configuration tab to check TCP/IP -> Wireless LAN PC Card is
installed. If no, click the Add button. Select Protocol and click the Add
button.
3. Select Microsoft for Manufacturer and TCP/IP for Network Protocol, and then
click OK.
4. If yes, double-click TCP/IP -> Wireless LAN PC Card to open TCP/IP
properties as shown in Figure 3-2. Due to different network applications
there are many different settings here. You can select either Obtain an IP
address automatically or specify an IP address. If you use the Specify and
IP address, then you need to enter an IP address, Subnet Mask, Gateway
IP address, and DNS Server IP address for connecting to Internet.
Figure 3-2