User's Manual

38
Nonfunctioning card LED
The USB Adapter is not powered on. The
cause may be:
 No Driver loaded or installed.
 Adapter – Driver mismatch which
prevented the driver from loading.
 Device conflicts which prevented the
driver from loading.
Actions:
 Verify that a driver has been installed.
 Determine if there is a conflict with
another device.
Weak signal or
intermittent connection.
Try reorienting the antenna. The USB
Adapter antenna is attached to the two
sides of the USB Adapter. For best use of
the antenna:
Keep the area around the antenna
clear from materials that could block
radio transmission, such as metal
objects, electronic devices, and
cordless telephones.
If your signal is weak, change the
direction of the antenna slightly.
If necessary, move your notebook
computer a few inches to find a better
signal.
Use the Link Quality and Signal Strength
display in the Monitor Utility to determine
the best location and orientation for a
network connection.