User Manual

ManualsBrandsSenao International ManualsElectronicsIndustrial cordless phone system - DuraFon1X

User Manual

WIRELESS SOLUTIONS PROVIDER

DuraFon 1X

Digital Long Range Cordless Phone

EnGenius Customer Service

United States: 1-888-735-7888

Canada: 1-888-397-2788

Table of Contents

Safety Instructions............................................................................4

General Safety Instructions ........................................................4

Product Safety Instructions.........................................................4

Battery Safety Instructions..........................................................6

Regulatory Information....................................................................7

Equipment Checklist........................................................................8

Handset Illustration..........................................................................9

Basic Handset Features...........................................................10

Additional Handset Features...................................................11

Administrator Features .............................................................13

Base Illustration.............................................................................15

Basic Base Station Features...................................................16

Charger Illustration........................................................................17

Charger Features..........................................................................18

Base Station Installation...........................................................19

Handset and Charger Installation...........................................20

Basic Operations ...........................................................................21

Operation Modes.......................................................................21

A. Base Operation Modes....................................................21

B. Handset Operation Modes..............................................21

Making a Telephone Call .........................................................22

Making an 2-Way/ Intercom Call.............................................23

A. Handset to Handset Calls...............................................23

B. Intercom/2-Way from Base to Handset.........................23

C. Intercom/2-Way from Handset to Base........................24

Making a Broadcast..................................................................24

A. Handset to Handset Calls...............................................24

B. Broadcasting from Base to Handset .............................25

C. Broadcasting from Handset to Base .............................25

Redial..........................................................................................25

Receiving a Telephone Call.....................................................25

Receiving an Intercom Call......................................................26

Ending a Call..............................................................................26

Adjusting Receiver (Earpiece) Voice Volume.......................26

Summary of content (22 pages)

PAGE 1
Table of Contents User Manual WIRELESS SOLUTIONS PROVIDER DuraFon 1X Digital Long Range Cordless Phone EnGenius Customer Service United States: 1-888-735-7888 Canada: 1-888-397-2788 Safety Instructions............................................................................4 General Safety Instructions ........................................................4 Product Safety Instructions .........................................................4 Battery Safety Instructions ...........................
PAGE 2
Placing a Call On Hold ............................................................. 27 Mute............................................................................................. 27 Do Not Disturb (Silent Ring).................................................... 27 Key Guard .................................................................................. 28 Battery Recharge and Replacement ...................................... 28 Advanced Operations ................................................
PAGE 3
. Changes or modifications to this product not expressively approved by the manufacturer will void the warranty and the FCC authorization to operate the equipment. Use only manufacturer provided accessories. 15. Do not place conductive objects over or near the antenna. 16. Do not use the product to report a gas leak while in the vicinity of the leak. 4. Do not use the telephone near water. Never spill liquid of any kind on this product. à revisit this line when we test out the water proof level 5.
PAGE 4
Regulatory Information Equipment Checklist DuraFon 1X FCC ID: NNA-XXXXXX IC: ______________ 1. In a Base + Handset package, please find the following components: a. Base Station x 1 b. Base Antenna x 1 c. Base AC/DC Adaptor x 1 d. Handset x 1 e. Handset Antenna x 1 f. 1700mA Li-ion Battery Pack x 1 g. Charger x 1 h. Charger AC/DC Adaptor x 1 i. Telephone Cord x 1 j. Belt Clip x 1 k. User’s Manual, Quick Guide, and Warranty Card 2. In a Handset package, please find the following components: a.
PAGE 5
Handset Illustration Handset Features Basic Handset Features 1. 4-line LCD (Liquid Crystal Display) a. The LCD display has LED (Light Emitting Diode) for backlighting. b. The 1st line of LCD consists of icons. c. Icons explanation from left to right (1) RSSI (Receive Signal Strength Indicator) During a call, the number of bars is proportional to the radio signal strength received.
PAGE 6
phone companies during a call. 4. 5. 2-WAY/INTERCOM a. Places an intercom call to another handset ID or a group ID (group paging). b. Intercom calls are digital, full duplex, and are conducted without the assistance from the base. BROADCAST a. Half duplex broadcasting to handsets for immediate announcement b. Half duplex broadcasting to base stations [please refer to page 24 for detail operation] 6. Left/Right Soft Keys a. Make menu selection. 7. Up(Ù) /Down(Ú) Scrolling Keys a.
PAGE 7
11. Dialing Prefix a. Up to 14 digits, including pause(s), one access code can be preprogrammed to be added automatically in front of the dialed number when dialing from call logs, phonebook, and dial-and-send dialing. 1. Supports both DTMF and Pulse dialing a. From an administrator handset (Handset 11), press MENU-9-1 to select Tone or Pulse dialing mode. b. Default is Tone dialing. 12. Call Hold a. Places call on hold b. Battery Hot Swap: Change battery while call is on hold. 2.
PAGE 8
Base Illustration Base Features Basic Base Station Features 1. Antenna a. The antenna port has a reverse thread connector; to remove antenna or cable, turn clockwise; to install, turn counterclockwise. Improper installation may damage the connector b. When using an outdoor antenna, locate the antenna (not the base station itself) as high as possible for a clear transmission path. 2. LED a. Power: it indicates base station has power. b. In-Use: it indicates an active telephone line. c.
PAGE 9
Charger Illustration Charger Features 1. DC In 1. DC In Connects to Charger AC Adaptor. 2. Handset Charging Slot a. Charge handset battery when handset is placed in cradle. 150 minute fast charge from empty. b. Refer to the handset LCD for charging status 3.
PAGE 10
Getting Started mm) end into the MOH jack on back of the base. Base Station Installation Handset and Charger Installation There are three possible base station setups: l Base station alone l Base station plus telephone answering device l Base station plus standard telephone 1. Plug the transformer end of the Charger AC/DC adaptor into a standard AC electric power outlet, plug the other end into the “DC In” jack on the back of the Charger.
PAGE 11
Basic Operations Main menu Sub-menu Operation Modes 1.KeyGuard Both the base station and handset have levels of operation at which time only certain procedures of functions can be performed. A. Base Operation Modes 1. IDLE mode- this is the default mode. The intercom, broadcast, and volume keys are active in IDLE mode. 2. 3. 2. 3.Call Logs ~21~ 1.Dial Prefix 2.Group Select 3.Language 4.Clear 5.Custom Name 6.Contrast 7.Backlight 8.Call Barring 9.Name Tag 5.Settings 6.
PAGE 12
Notes: 1. 2. 3. If the line is occupied, the LCD shows “No Line Available” and handset returns to standby mode. If a link cannot be established, the LCD will show “No Base” after a 12-second time out. A call duration timer will start displaying the length of the call after link is established. C. Intercom/2-Way from Handset to Base 1. Press Intercom key followed by a two-digit base ID [Note: Base 1 ID as 10, Base 2 ID as 20, Base 3 ID as 30, and Base 4 ID as 40] 2.
PAGE 13
opened up d. Press END key to end the broadcasting B. Broadcasting from Base to Handset 1. Broadcast to all handsets a. Press Broadcast key on the base station to intercom all registered handsets. b. Hear bi-bi-beep while the initiating handset broadcast all handsets within communication coverage. c. The Broadcast LED will light up d. Press the Broadcast key again and return to IDLE mode C. Broadcasting from Handset to Base 1. Broadcast to the base station a.
PAGE 14
3. 4. Use ÙandÚ arrow key to adjust 2. The new setting remains effective for all future calls until changed. Key Guard Ring Volume: áâ Off SAVE 1. To prevent accidental dialing, you can press Menu (Right) soft key, then press “1” to select KeyGuard option. The handset keypad is locked. No key entry is accepted except the power on/off key. (Ë 11 2. To unlock the keypad, press “Unlock” (Left) soft key, then, within 2 seconds, press the digit “1” to unlock. (Ë 11 3.
PAGE 15
Advanced Operations 2. Handset Registration 1. If your handset(s) is purchased as part of a system, it has been preregistered with the base station at the factory. 2. If Handset ID as “00,” that means it is a new handset or the ID has been erased. You need to register the handset with the base station. 3. 4. Registration: a. Press MENU-6 to enter the registration mode b. Press and hold the base’s Registration (REG) button for 2 seconds until 4 LEDs light up. c.
PAGE 16
2. 3. 4. Press HOLD (Right) soft key to put call on hold. Press OPTION (Right) soft key to enter selection menu. (Ë 11 You have a Call on hold UNHOLD OPTION 2. 3. (Ë 11 Three types of transfer method: a. Transfer PBX (1) When DuraFon 1X is adjunct to the PBX system, you can transfer the call to an assigned PBX extension.
PAGE 17
and OFF. The default setting is OFF. d. Select ON and press SAVE key e. You can key in the specific “call transfer” feature code and press OK to confirm the setting. For example, if your PBX is N brand, you need to key in “Flash”+”*”+”70” as the call transfer code. f. You will see a “DONE” confirmation. (Ë 11 Notes: 1. When enter a phone number, the cursor automatically advances to the next digit field.
PAGE 18
displayed is the bottom of the list. 5. 6. 7. 8. 9. 2. The first line of LCD display shows name and the 2nd line shows the phone number. If the phone number is longer than 14 digits, press OPTION (Right) soft key and select Option 3 to view the complete number. 3. To search for a record: a. Use ÙorÚ scrolling key to enter the Phone Book mode. b. Press a key that corresponds to the first character of the name you are looking for. c.
PAGE 19
backward or forward to insert character or delete the character. For example, you are editing the message 1 as “Meeting now.” (3) When finished, press SAVE (Left) soft key to save change. You will see the Text Message ID as 01 on the upper right corner of the LCD screen. 5. 6. Sending a text message: a. While viewing the message, press Intercom key followed by a Handset ID or a Group ID (01-09). b. The current message is sent. c. There will be no acknowledgement returned.
PAGE 20
b. Press “2” to view the last 10 phone numbers received, starting from the most recent one. Use ÙorÚ to scroll through the list. Press OPTION for options. (1) Erase: press “1” and confirm to erase the current record. (2) Save: press “2” to edit and save or save without editing into the phonebook. (3) View Number: press “3” to view the complete number if the phone number is longer than 14 digits. (4) No entries: the LCD displays “No entries” if there is no “Received call logs”.
PAGE 21
Technical Specifications h. Call barring (1) Need to Enter Password to edit the call barring code to be executed. The default PW is “0000.” (2) Please refer to page 12 for detail operation. i. Name tag (1) Use ÙorÚ to switch between On and Off. The default setting is Off. (1) When finished; press SAVE to save change. 6. Press “6” to register or de-register handset: See the detail instructions on page 29. 7. Press “7” to view inbox text message(s) or edit outbox text message(s).
PAGE 22
Federal Communication Statement Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.