User Manual

Wireless 11N USB Adapter
36
4.3.1. Profile Properties
When adding a profile you are required to enter a profile name and SSID as well
as configure the network type and encryption/authentication settings. A profile
can be configured as Infrastructure or Ad-hoc mode. The configuration settings
for each mode are described below.
 Profile Name: Input the profile name you want. And the name can not
be the same with each other of all profiles. If have reduplicate profile
name, it will have a warning message.
 SSID: Input the SSID of available AP
 Ad-Hoc: A computer to computer network, and wireless access point is
not used. When enable this function, you can select the channel to
connect. (This is the simplest network configuration with several
computers equipped with the PC Cards that form a wireless network
whenever they are within range of one another. In ad-hoc mode, each
client is peer-to-peer, would only have access to the resources of the