User's Manual

Araknis Networks Wireless Access Point

Quick Start Guide

Step 3. Mount the Access Point

Table Top/Shelf

The WAP comes with rubber feet installed for placement on ﬂat

surfaces. The mounting bracket is not required for this application.

Junction Box Mounting

The mounting bracket is compatible with most common junction box

and plaster ring dimensions, including common ceiling box sizes:

• Single/Double Gang

• 4” Square Box

• 3” Octagonal Box

• 4” Octagonal Box

A. Place the mounting bracket over

the junction box and attach it

loosely with 2 screws. (6-32 x 1”

screws included)

B. Level or align the bracket with

nearby object and tighten the

screws enough to secure it. Avoid

over-tightening and warping the

bracket.

C. Connect the wiring to the WAP and

push any extra wiring back into the

opening.

D. Snap the WAP onto the bracket.