User's Manual

www.snapav.com | Support: 866.838.5052
11
Araknis Networks Wireless Access Point
Quick Start Guide
Wall or Ceiling Mounting
A. Place the bracket over the desired mounting location.
B. Level the bracket or align it with
nearby objects for uniformity. Point
the arrow on the bracket up for wall
mounting.
C. Mark the “C” or “D” slots on the
mounting surface.
D. Thread one of the included drywall
anchors into the center of each mark
using a Phillips screwdriver.
E. Level or align the bracket with
nearby object and tighten the
screws enough to secure it. Avoid
over-tightening and warping the
bracket.
F. Connect the wiring to the WAP and
push any extra wiring back into the
opening.
G. Snap the WAP onto the bracket.