User's Manual

© 2014 Araknis Networks
®
12
Araknis Networks Wireless Access Point
Quick Start Guide
Ceiling Tile Mounting
A. Place the bracket over the desired mount-
ing location and align it with nearby ob-
jects for uniformity.
B. Mark the “C” or “D” slots on the ceiling tile
(and the center hole if needed for wiring).
C. Cut the opening with a keyhole saw. Use a
drill to make clean holes for the mounting
screws.
D. Place the ceiling backing plate and nuts
on top of the tile as shown and fasten the
mounting bracket to the tile using the
included screws.
E. Connect the wiring to the WAP and push
any extra wiring back into the opening.
F. Snap the WAP onto the bracket.