User's Manual

www.snapav.com | Support: 866.838.5052

Araknis Networks Wireless Access Point

Quick Start Guide

Step 4. Check Operation of the WAP

Once the WAP is powered, the status LED can be used to determine

proper operation.

You may check the Wireless Network Connections in your PC to see if

the default SSID “araknis_initial” is being broadcast. If the SSID is being

broadcast, continue to the next page to begin setup.

Status LED Operation

After installing the WAP, connect the network and power cables and

check the status LED. Once the LED remains illuminated (no more

ﬂashes), then the device is ready to be accessed for setup.

Status LED

AN-100-AP-I-N

Blue LED

• Blinking: Device is not working correctly. Refer to the full man-

ual or contact SnapAV technical support.

• Solid: WAP is operating correctly.

AN-300-AP-I-N

Blue/green LED

• Solid Blue, no change to green after 2 minutes: Boot-up or net-

work connection issue.

• Solid Green: WAP is operating correctly.

• Blinking Green: Device is not working correctly. Refer to the full

manual or contact SnapAV technical support.