User's Manual

2.1.4. Time Zone
The System Settings screen allows conguration of AN100/300 Time Zone settings.
Figure 14. Time Zone
Path Settings, System
Parameters
• TimeZone– Select the appropriate Time Zone from the drop-down.
• EnableDaylightSaving– Select to enable. DST start/end can change from year to year. Be sure to update this
information.
Start– Select the Month, Date, Day and Time Daylight Saving Time starts.
End– Select the Month, Date, Day and Time Daylight Saving Time ends.
Configuration Instructions
To congure Time Zone Settings:
1. Click Settings, System.
2. Specify the Time Zone.
3. Click Save.
THISINFORMATIONLEFTINFORUSEINSAVE/CANCELINSTRUCTIONS.THISWILLNOTBEPARTOF
THEFINALTEXT.
Save/Cancel
• Save– Click to save changes to the System Settings. The changes should appear as a numeric value on the Apply
Changes button.
• Cancel– Click to cancel changes to System Settings.
• ApplyChanges– Click to apply saved changes to System Settings. The Unsaved Changes List should appear.
• Apply– Click Apply at the bottom of the Unsaved Changes List to implement changes.
• Revert– Click to cancel Unsaved Changes List. No changes will have been made.
• Navigate to desired AN100/300 setup screen or Exit setup.