User's Manual

15. InterimAccountingInterval– Enter a value for how often the accounting data will be sent, in seconds.
RANGE: 60-600. DEFAULT: 600 (10 minutes)
16. Save– Click to save changes to the Wireless Security Settings for this network. The window will close. The
changes should appear as a numeric value on the Apply Changes button. Proceed with setup if additional
changes are required, or proceed to Save/Cancel at the end of this section.
17. Cancel– Click to cancel changes to the Wireless Security Settings for this network. The window will close.
Proceed with setup if additional changes are required.
• BroadcastSSID– Select Yes to have the SSID appear on wireless devices for connectivity. DEFAULT: Yes
• BandSteering– Enable Band Steering to assign 802.11n clients to the 5GHz band and 802.11b/g clients to the 2.4GHz
band. This will relieve the trafc on both bands and provide better service to all affected clients. Band Steering works
within the Access Point by directing 5GHz capable clients to the 5GHz band. The SSID and Security Settings must be
the same in both the 2.4Ghz and 5GHz bands to have Band Steering work properly.
• ChannelIsolation–Select to prevent communication between wireless clients on the same network. DEFAULT: Not
selected.
• Add– Click the Add button to add a Wireless Network.
• Delete– Click the Trash icon to delete a Wireless Network.
Configuration Instructions
To congure Wireless Networks:
1. Click Settings, Wireless.
2. Specify the Wireless Network Settings.
3. Click Save.