User's Manual

3. Maintenance
3.1. Ping Test
The Ping Test can be used to determine if a particular IP address can be reached across an IP network.
Figure 27. Ping Test
Path Maintenance, Ping
Parameters
• TargetIP/DomainName– Enter the IP Address of a device or web page to determine if it can be reached.
• PingPacketSize– Enter the packet size of each ping. DEFAULT: 64 Bytes
• NumberofPings– Enter the number of ping attempts. DEFAULT: 4
• Start– Click the Start button to send the Ping. Ping Test results will be displayed in the text frame. Ideal results: Same
number of packets transmitted/received, 0% packet loss
Configuration Instructions
To run Ping Test:
1. Click Maintenance, Ping.
2. Specify the Ping Test Settings.
3. Click Start.