User's Manual

3.4.1.3. Restore Factory Defaults
The File Management screen facilitates restoring original AN100/300 factory settings. Note that the IP Address, Subnet Mask
and Gateway IP Address will be reset to their factory defaults.
Figure 32. Restore Factory Defaults
Path Maintenance, File Management, Conguration File, Restore Factory Defaults
NOTE: All current settings will be permanently lost if not backed up. See Backup Current Conguration, above to backup
current settings prior to executing Restore to Factory Defaults.
1. Click the Yes button to restore the AN100/300 to factory default settings. The red Alert! message will appear.
2. Click Cancel to cancel. Click Conrm to Restore Factory Defaults. Please wait while the Rebooting screen is open
and loading the selected conguration. When the conguration upload is nished the Authentication Required
(Login) window will open.
3. Enter the User Name and Password.
4. Conrm Conguration settings.
3.4.1.4. Hardware Factory Default
If restoring factory defaults does not restore proper functionality to the AN100/300, a hardware reset may be performed to
reload the original base conguration le (saved in the AN100/300 memory).
Configuration Instructions
1. Using a paper clip or other small blunt tool press the reset button located on the top of the AN100/300 for approx 30
seconds.
2. Restart the setup process or upload a previously saved conguration.