User's Manual

4.1.1. Radio Settings
The Advanced Wireless Settings section allows conguration of AN100/300 radio settings for unit of measure, data rate, power
and RTS/CTS Threshold.
Figure 37. Radio Settings
Path Advanced, Wireless Settings, Radio Settings
Parameters
• TransmitPowerUnit– Select the preferred unit of measure. OPTIONS: dBm, mW. DEFAULT: dBm.
• DataRate– Select a setting from the drop-down to set the available transmit data rate permitted for connected clients.
A lower data rate reduces throughput, but increases the transmission range. OPTIONS: See drop-down list. DEFAULT:
Auto.
• TransmitPower– Select a setting from the drop-down to set the AN100/300 radio power. Increasing the power should
improve performance, but can cause interference with other access points in close range that are on the same channel.
OPTIONS: See drop-down list. DEFAULT: Full 100% -25dBm.
• RTS/CTSThreshold(Range:1-2346)– Enter a value for the threshold package size for RTS/CTS (request to send/
clear to send). A lower number increases the frequency that the packets are sent and consumes more bandwidth.
RANGE: 1-2346. DEFAULT: 2346
Configuration Instructions
To congure Radio Settings:
1. Click Advanced, Wireless Settings.
2. Specify the Radio Settings.
3. Click Save.