User's Manual

4.1.2. Client Limit
The Advanced Wireless Settings section allows conguration of AN100/300 client limit by band, (2.4GHz/5GHz).
Figure 38. Client Limit Settings
Path Advanced, Wireless Settings, Client Limit
Parameters
NOTE:TheWAP100willindicatesettingsandinformationforthe2.4GhzChannel.TheWAP300willindicatesettings 
andinformationforthe2.4GHzand5GHzChannels.
• Enable– Select to enable Client Limit, by channel. DEFAULT: Not Selected.
• MaxClientNo.– Set the maximum number of clients that can be connected to a channel at a given time. (For WAP300,
the maximum number of clients is for each channel.) RANGE: 1-127. DEFAULT: 127.
Configuration Instructions
To congure Client Limit:
1. Click Advanced, Wireless Settings.
2. Specify the Client Limit Settings.
3. Click Save.