User's Manual

4.2. Wireless MAC Filter Settings
The Wireless MAC Filter determines if wireless clients (computers, tablets, smartphones, etc.) can access the
wireless network as defined by client MAC Address. Authorized clients can be configured and viewed in the MAC
Filter List.
Figure 39. Wireless MAC Filter Settings
Path Advanced, MAC Filter
4.2.1. MAC Filter Settings
The MAC Filter Settings section enables/disables AN100/300 Wireless MAC Filtering.
Figure 40. MAC Filter Settings
Path Advanced, MAC Filter
Parameters
• EnableMACFilter– Select to enable MAC Filtering. DEFAULT: Not Selected.
• FilterMode– Select Allow to permit wireless clients access to the wireless network as dened by wireless client MAC
Address. Select Deny to prevent wireless clients from accessing the wireless network as dened by wireless client MAC
Address. OPTIONS: Allow, Deny. DEFAULT: Allow.
Configuration Instructions
To congure Wireless MAC Filter:
1. Click Advanced, MAC Filter.
2. Specify the Wireless MAC Filter Settings.
3. Click Save.