User's Manual

4.3.1. WPS Settings - 2.4Ghz

The WPS Settings (2.4GHz) section can be used to conﬁgure WPS for wireless 2.4GHz clients.

Figure 43. WPS Settings - 2.4GHz

Path Advanced, WPS, WPS Settings - 2.4GHz

Parameters

NOTE:TheWAP100willindicatesettingsandinformationforthe2.4GhzChannel.TheWAP300willindicatesettings 

andinformationforthe2.4GHzand5GHzChannels.

• Status– Select Enable to enable WPS. Select Disable to disable WPS. DEFAULT: Disable.

• CurrentConguration– Indicates whether WPS is Congured or Uncongured. OPTIONS: Congured, Uncongured.

DEFAULT: Uncongured.

• Self-PinCode– The AN100/300 PIN Code. DEFAULT: Unique per AN100/300.

• SSID– Indicates the wireless network name for the WPS enabled network. DEFAULT: araknis_initial

• AuthenticationMode– Indicates the Authentication Mode by WPS. DEFAULT: None

• EncryptionKey– The password randomly generated by WPS to authenticate wireless client connection.

• WPSviaPushButton– Click Start to initiate WPS via the on-screen push button.

• WPSviaPIN– Enter the wireless device PIN code then click Start to initiate WPS.

Conﬁguration Instructions

To congure WPS Settings (2.4GHz):

1. Click Advanced, WPS.

2. Specify the WPS Settings (2.4GHz).

3. Click Save.