User's Manual

4.7. Wireless Trac Shaping Settings
Trafc shaping is used to regulate packet ow to control wireless network saturation and improve (reduce) latency.
Figure 50. Wireless Trac Shaping Settings
Path Advanced, Trafc Shaping
Parameters
NOTE:TheWAP100willindicatesettingsandinformationforthe2.4GhzChannel.TheWAP300willindicatesettings 
andinformationforthe2.4GHzand5GHzChannels.
• Enable – Select to enable Trafc Shaping on the 2.4GHz and/or 5GHz band.
• SSID – Indicates the network to which Trafc Shaping will be applied.
• Interface – Indicates 2.4GHz or 5GHz band.
• DownloadLimit – Enter a value to regulate download speed. RANGE: 1-999Mbps. DEFAULT: 100Mbps.
• UploadLimit – Enter a value to regulate upload speed. RANGE: 1-999Mbps. DEFAULT: 100Mbps.
Configuration Instructions
To congure Wireless Trafc Shaping:
1. Click Advanced, Trafc Shaping.
2. Specify the Wireless Trafc Shaping Settings.
3. Click Save.
•