User's Manual

4.8.2. SNMPv3 Settings

This section allows conguration of SNMPv3 Settings.

Figure 53. SNMP Settings

Path Advanced, SNMP, SNMPv3

Parameters

• Status – Select Enable to enable SNMPv3. Select Disable to disable SNMPv3. DEFAULT: Enable

• UserName – Enter a User Name for SNMPv3 implementation. RANGE: 1-31 Characters. DEFAULT: admin.

• AuthorizedProtocol – Select the desired protocol from the drop-down. OPTIONS: MD5, SHA, None. DEFAULT: MD5

• AuthorizedKey – Enter an authentication key. This key acts as an electronic signature to authenticate an SNMPv3

message. RANGE: 8-32 Characters. DEFAULT: 12345678

• PrivacyProtocol – Select the desired protocol from the drop-down. OPTIONS: DES, None. DEFAULT: DES

• PrivacyKey – Enter a Privacy Key. This acts as an encryption for the data within a SNMPv3 message. RANGE: 1-8

Characters. DEFAULT: 12345678

• EngineID – Enter an Engine ID. The Engine ID identies where a SNMPv3 message is coming from. DEFAULT: Blank

Conﬁguration Instructions

To congure SNMPv3 Settings:

1. Click Advanced, SNMP.

2. Specify the SNMPv3 Settings.

3. Click Save.