User's Manual

1.2.1. Radio Status
The Radio Status screen provides a detailed look at AN100/300 radio settings and performance.
Figure 7. Radio Status
Path Status, Wireless Interface, Radio Status
Parameters
NOTE:TheWAP100willindicatesettingsandinformationforthe2.4GhzChannel.TheWAP300willindicatesettings 
andinformationforthe2.4GHzand5GHzChannels.
• InterfaceStatus– Indicates whether the 2.4/5GHz Wireless Interface is Enabled or Disabled.
• OperationMode– Indicates the current function of the AN100/300 2.4/5GHz Wireless Interface. (Access Point)
• WirelessMode– Indicates the Wireless Mode for the 2.4/5GHz Wireless Interface. (802.11b/g/n; 802.11a/n)
• ChannelBandwidth– Indicates the bandwidth of the AN100/300 operating channel. (20MHz or 40MHz)
• ChannelSelection– Indicates the channel selection mode of the AN100/300 2.4/5GHz Wireless Interface. (Auto or
Manual)
• OperatingChannel– Indicates the selected channel for the AN100/300 2.4/5GHz Wireless Interface.
• ChannelFrequency– Indicates the frequency of the selected channel for the AN100/300 2.4/5GHz Wireless Interface.
• TX– Live counter of data, in bytes, transmitted on each radio interface.
• RX– Live counter of data, in bytes, received on each radio interface.