User Manual

Multi-Function Gigabit Wireless-N Client Bridge

Version 1.0

2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow

you to configure the TCP/IP settings of your PC/Notebook.

3. Select Use the following IP Address radio button and then enter the IP address and subnet

mask. You may follow the example below. Please Ensure that the IP address and subnet mask

are on the same subnet as the device.

For Example: Device IP address: 192.168.1.2

PC IP address: 192.168.0.10

PC subnet mask: 255.255.255.0

4. Click on the OK button to close this window, and once again to close LAN properties

window.