User Manual

Multi-Function Gigabit Wireless-N Client Bridge
Version 1.0
39
 In order to configure the device as an Access Point,
select Repeater from the Operating Mode drop-down
list.
 A dialog box will appear to notify you that the system
will restart in order for the change to take effect. Click
on the OK button to continue.
 Please wait while the device counts down and restarts
into the new operating mode.
 Once the device has restarted into Repeater mode, you
will see a new drop-down menu with eight options
which are: Status, Basic, Advanced, Security, Filter,
WPS, Client List, and WMM. Each of the options is
described in detail below.
3.2.4.5.1 Status
 Click on the Status link under the Wireless drop-down menu. This page will display the
current wireless settings such as SSID, Channel, Security and BSSID (MAC address)