User Manual

Table Of Contents

6.3 Wireless MAC Filter

Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC addresses.

You can manually add a MAC address to restrict the permission to access EAP350. The default setting is Disable

Wireless MAC Filter.

Note: Only in Access Point and WDS AP mode.

Wireless Filter (Access Point / WDS AP mode)

ACL Mode Determines whether network access is granted or denied to clients whose MAC addresses

appear in the MAC Address table on this page. Choices are Disable, Deny MAC in the list, or

Allow MAC in the list.

MAC Address Enter the MAC address of the wireless client.

Add

Click

Add

to add the MAC address to the

MAC Address

table.

Delete

Delete the selected entries.

Apply Click Apply to apply the changes.