User's Manual

2.3 Client Bridge
In the Client Bridge Mode, the ENH200 function likes a wireless client connecting to an Access Point
wirelessly and surf internet whenever you want. Using Site Survey to scan all the Access Point within
the range and configure its SSID and Security Password to associate with it. Connect you station to
the LAN port of the ENH200 via Ethernet.
2.4 WDS Bridge
In the WDS Bridge Mode, the ENH200 can wirelessly connect different LANs by just simply configure
each other’s MAC Address and Security Settings. This mode is used when two wired LANs locate in
small distance and want to communicate each other. The best solution is using ENH200 wirelessly
connect two wired LANs. WDS Bridge Mode can establish 16 WDS links, the network diagram is like a
Star.
WDS Bridge Mode is unlike Access Point. APs linked by WDS are using the same
frequency channel, more APs connected together may lower throughput. Please be aware to avoid
loop connection diagram, otherwise enable Spanning Tree Function.
Access Point /
Wireless Router
Internet
ENH200
Client
ENH200
WDS
ENH200
WDS
WDS
Client
WDS
Client
ENH200
Client
ENH200
ENH200
Client