User's Manual

6.6 WDS Link Settings
WDS Link Settings is used to establish a connection between Access Points but the device is not
losing Access Point function. AP has WDS function can extend the wireless coverage and allow LANs
to communicate each other.
MAC Address Enter the Access Point’s MAC address that you would like to extend
the wireless area.
Mode Select Disable or Enable from the drop down list.
Accept / Cancel Press Accept to confirm the changes or Cancel to return previous
settings.
Accept does not compile the changes, you must go to Status -> Save/Load to apply the new settings.
Please refer to the chapter 4.1 for more detail.
The Access Point that you would like to extend the wireless area must enter your Access Point’s MAC
address. Not all Access Point supports this feature.