User's Manual

7 LAN Setup
This section will guide you to setup the Local Area Network (LAN) settings
7.1 IP Settings
This section is only available for Non-Router Mode. IP Settings allows you to LAN port IP address of
the ENH200.
IP Network Setting Select Radio button for Obtain an IP address automatically or Specify
an IP address.
IP Address Specify LAN port IP address.
IP Suet Mask Specify Subnet Mask.
Default Gateway Specify Default Gateway
Primary DNS Specify Primary DNS
Secondary DNS Specify Secondary DNS
Accept / Cancel Press Accept to confirm the changes or Cancel to return previous
settings.
1. Obtain an IP address automatically is not a DHCP server. It means automatically get IP address
when device connected to a device which has DHCP server.
2. Changing LAN IP Address will change LAN Interface IP address. Webpage will automatically redirect
to the new IP address after Apply.