User's Manual

9 Management Settings
Management section is on the navigation drop-down menu. You will then see seven options:
administration, management VLAN, SNMP settings, backup/restore settings, firmware upgrade, time
settings, and log. Each option is described below.
9.1 Administration
Click on the Administration link under the Management menu. This option allows you to create a
user name and password for the device. By default, this device is configured with a user name and
password admin. For security reasons it is highly recommended that you create a new user name
and password.
Name Specify Username for login.
Password Specify a Password for login
Confirm Password Re-enter the Password for confirmation.
Remote Management Select the Radio button to Enable or Disable Remote Management.
Remote Upgrade Select the Radio button to Enable or Disable Remote Upgrade.
Remote Management
Port
Specify the Port number for Remote Management. For example: If you
specify the Port number is 8080, then you will need to enter following
http://<IP address>:8080 to access the web interface.