User's Manual

10.3 WDS Bridge Mode

Use this feature to link multiple APs in a network. All clients associated with any APs can

communicate each other like an ad-hoc mode.

WDS Bridge

Step1 Login to the web-based configuration interface with default IP

192.168.1.1

Step2 Follow region’s regulation.

Step3 Select Operation Mode to WDS Bridge from System Properties.

Step4 Select channel you would like to use.

Step5 Setup the authentication settings

Step6 Setup WDS Link Settings.

Step7 Specify the AP’s MAC address you would like to connect with.

Step8 Press Apply to process all the configurations.

Each WDS bridge’s device must use the same Subnet, Wireless Mode, Wireless Channel,

and Security Setting.

ENH

WDS

ENH

WDS

Client

WDS

Client

ENH

Client

ENH

ENHClient

192.168.1.1

192.168.1.2

192.168.1.3

192.168.1.4

192.168.1.5