User's Manual
Table Of Contents
- 1 Product Overview
- 2 Installation
- This chapter describes how to install the ENH202.
- Select the optimal locations for the equipment using the following guidelines:
- 3 Wireless Network Modes
- 4 Configuring Your Computer for TCP/IP
- 5 Status
- 6 System
- 7 Wireless Configuration
- 8 LAN Setup
- 9 Router Settings
- 10 Management Settings
- 11 Network Configuration Examples
- Appendix A – Troubleshooting
- Appendix B – Specifications
- Appendix C – Glossary
- Appendix D – Statements of Conformity
7.2.4 WPA-PSK Mixed
Security Mode Select WPA-PSK Mixed from the drop down list.
Encryption Select Both, TKIP or AES for encryption type.
Passphrase Specify the security password.
Group Key Update
Interval
Specify Group Key Update Interval time.
Using WPA-PSK Mixed can allow multiple security modes at the same time.
The IEEE 802.11n standard does not include WEP/WPA-PSK/WPA-PSK TKIP
security mode. To comply with the standard, when you use the above encryptions, the
wireless transmit mode will drop from 802.11n to 802.11g.