User's Manual

5.2.4 Client Bridge Mode/Client Router Mode (Dual Mode)
Client Bridge Mode/ Client Router Mode lets you connect two LAN segments via a wireless link as
though they are on the same physical network. Since the computers are on the same subnet,
broadcasts will reach all machines. As a result, DHCP information generated by the server will reach
all client computers as though the clients resided on one physical network.
The following figure shows an example of two ENH700EXT devices operating in Client Bridge Mode.
One ENH700EXT uses its 2.4 GHz radio to communicate with a 2.4 GHz Access Point, while the other
ENH700EXT uses its 5 GHz radio to communicate with a 5 GHz Access Point.
The sections that follow the figure below describe how to configure your ENH700EXT for Client
Bridge Mode.