User's Manual

60
WDS Bridge
Step1 Login to the web-based configuration interface with default IP 192.168.1.1
Step2 Select Operation Mode to WDS Bridge from System Properties.
Step3 802.11a (5GHz) wireless network.
Step4 Select channel you would like to use.
Step5 Setup the authentication settings
Step6 Setup WDS Link Settings.
Step7 Specify the AP’s MAC address you would like to connect with.
Step8 Press Apply to process all the configurations.
Auction: Each WDS bridge’s device must use the same Subnet, Wireless Mode, Wireless Channel, and Security Setting.
9.4 Client Router
In the Client Router Mode, the EOC5510 has DHCP Server build inside that allows many LANs
automatically generate an IP address to share the same Internet. Connect an AP/WISP Wirelessly and
connect to LANs via wired. Client Router Mode is act completely opposite to the AP Router Mode.