User's Manual

61
Please refer to the last section to check Access point’s configuration.
Client Router
Step1 Login to the web-based configuration interface with default IP 192.168.1.1
Step2 Select Operation Mode to Client Router from System Properties.
Step3 Change your Local Area Network setting to Obtain an IP Address Automatically.
Step4 802.11a (5GHz) wireless network.
Step5 Use site survey to scan Access Points that are available in nearby area.
Step6 Select the AP you would like to associate with.
Step7 Setup the authentication settings that match to the Access Point’s setting.
Step8 Setup your WAN connection type given by your Internet Service Provider from WAN
Settings.
Step9 Press Apply to process all the configurations.
Auction: Client Router’s IP setting must match to the Access Point’s subnet.