User Manual

9 Bring up ESR-9752

Connect the supplied power-adapter to the power inlet port and connect it to a

wall outlet. Then, ESR-9752 automatically enters the self-test phase. During self-

test phase, Power LED will blink briefly, and then will be lit continuously to

indicate that this product is in normal operation.

10 Smart Wizard

CHECK

• Internet connection should be setup & ready to use (ADSL or cable modem).

• Modem must provide RJ45 port to connect with ESR-9752.

• Microsoft Windows compatible PC/Notebook with UPnP enabled network

adapter

• CAT 5 network cable(s), RJ45 port on PC/Notebook.

STEP 1

Connect ESR-9752 WAN port & your modem WAN port with RJ45 cable.

STEP 2

Power up ESR-9752.POWER led on front panel lights up & remains stable.

STEP 3

Connect ESR-9752 LAN port & PC/Notebook RJ45 port with network cable.

Click on this icon to run SMART WIZARD.