User Manual

36
14 Wireless Settings
- Basic
In basic setting page, you can set wireless Radio, Mode, Band, SSID, and
Channel.
Radio: You can turn on/off wireless radio. If wireless Radio is off, you cannot
associate with AP through wireless.
Mode: In this device, we support three operation modes which are AP router,
AP route with WDS (we will introduce this function later section), and
repeater. If you choose AP Router Mode, you can select AP or WDS
function in the drop-down menu.
Band: You can select the wireless standards running on your network
environment.
2.4 GHz(B): If all your clients are 802.11b, select this one.
2.4 GHz(N): If all your clients are 802.11n, select this one.
2.4 GHz(B+G): Either an 802.11b or an 802.11g wireless devices are in
your environment.
2.4 GHz(G): If all your clients are 802.11g, select this one.