User Manual

63
- Quality of Service (QoS)
QoS can let you classify Internet application traffic by source/destination IP
address and port number. You can assign priority for each type of application
and reserve bandwidth for it. The packets of applications with higher priority will
always go first. Lower priority applications will get bandwidth after higher priority
applications get enough bandwidth. This can let you have a better experience in
using critical real time services like Internet phone, video conference …etc. All
the applications not specified by you are classified as rule “Others”. The rule with
a smaller priority number has a higher priority; the rule with a larger priority
number has a lower priority. You can adjust the priority of the rules by moving
them up or down.
Port-based Qos
This is hardware port-based QoS control method. It will limit the packets
throughput in LAN1~4, WAN port.
Enable Port-based QoS: Check this to enable port-based QoS functionality for
the LAN/WAN port. You can also uncheck to disable.
Priority: High or Low priority level of the transmit packets.