User Manual Part 2

73
73
 Add StreamEngine Rule: A StreamEngine Rule identifies a specific message flow and assigns a priority to that flow. For most
applications, automatic classification will be adequate, and specific StreamEngine Rules will not be required. StreamEngine supports
overlaps between rules, where more than one rule can match for a specific message flow. If more than one rule is found to match the
rule with the highest priority will be used.
 Enable: Place a check in this box to enable the StreamEngine rule.
 Name: Specify a name for the rule.
 Priority: Specify a priority for the rule. Being with 1 which is the highest and 255 the lowest priority.
 Protocol: Specify a protocol or select one from the drop-down list.
 Local IP Range: Specify the local (LAN) IP address range.
 Local Port Range: Specify the local (LAN) port range.
 Remote IP Range: Specify the remote (WAN) IP address range.
 Remote Port Range: Specify the remote (WAN) port range.
 Click on the Save button to insert the entry into the StreamEngine list.