User's Manual Part 2

Routing

If your TRAVEL ROUTER device is connected a network with

different subnets, then this feature will allow the different

subnets to communicate with each other.

Note: NAT function needs to be disabled for the Routing feature to be

enabled.

Static Routing

Enable Static Routing:

Tick this box to Enable the Static Router feature.

Destination LAN IP:

Enter the IP address of the destination LAN.

Subnet Mask:

Enter the Subnet Mask of the destination LAN IP address

Default Gateway:

Enter the IP address of the Default Gateway for this destination IP and Subnet.

Hops:

Specify the maximum number of Hops in the static routing rule.

Interface:

Select whether the routing applies to LAN or WAN interfaces.