User Manual

EUB9706 series --IEEE802.11b/g/n Wireless LAN USB 2.0 Client Adapter Version 1.0

 Authentication Type: Select TTLS from the drop-down list.

 Protocol: Select EAP-MSCHAP v2, MS-CHAP, or CHAP from the drop-

down list.

 Identity: Enter the user name.

 Password: Enter the password.

 Click on the OK button to save the changes.

802.1x CA Server

Depending on the EAP in use, only the server or both the server and client may

be authenticated and require a certificate. Server certificates identify a server,

usually an authentication or RADIUS server to clients. Most EAPs require a

certificate issued by a root authority or a trusted commercial Certificate Authority.

 Use certificate chain: Place a check in this to enable the certificate use.

 Certificate issuer: Select the Certification Authority from the drop-down list.

 Allow intermediate certificates: During tunnel creation the client must

verify the server’s certificate. When checking this certificate the signature

is verified against a list of trusted certificate authorities. If this parameter is

true then the client will also accept a signature from a trusted intermediate

certificate authority, otherwise it will not.