SLS20XP / SLS25XP Operating Instructions Instrucciones de Operacion Mode d’Emploi Senco Products Inc. 8485 Broadwell Road Cincinnati, Ohio 45244 Questions? Comments? call SENCO’S toll-free Action-line: 1-800-543-4596 or e-mail: toolprof@senco.com www.senco.com © 2007 by Senco Products, Inc. Warnings for the safe use of this tool are included in this manual. Los avisos para el uso seguro de esta herramienta están incluidos en este manual.
English Español Français TABLE OF CONTENTS TABLA DE MATERIAS TABLE DES MATIERÈS Tool Use Maintenance Troubleshooting Specifications Accessories Options Uso de la Herramienta Mantenimiento Identificación de Fallas Especificaciones Accesorios Opciones 2 5 6 7 9 9 Keep this manual available for use by all people assigned to the use of this tool. For personal safety and proper operation of this tool, read and understand all of these instructions carefully.
Tool Use Uso de la Herramienta Utilisation de l’Outil Español English l Las herramientas deberán ser l Keep tool pointed away from operadas a la menor presión que se necesite para su aplicación. Esto reducirá el nivel de ruido, el desgaste de las partes, y el uso de energía. yourself and others and connect air to tool. Tools shall be operated at the lowest pressure needed for the application. This will reduce noise levels, part wear, and energy use.
Tool Use Uso de la Herramienta Utilisation de l’Outil English Español l Las herramientas con “Ga- tive) trigger, nails can only be driven one way. First depress workpiece contact (safety element) against work surface then pull trigger. This feature is helpful when precise fastener placement is required. l Read the “Customer Satisfaction and Safety Reminder” (CSSR) in the tool and fastener boxes for safety information regarding the Contact-Actuation and Sequential triggers.
Maintenance Maintenimiento Entretien English Español Français l Read and understand “SAFETY INSTRUCTIONS” manual shipped with this tool before using tool. l All screws should be kept tight. Loose screws result in unsafe operation and parts breakage. l With tool disconnected, make daily inspection to assure free movement of workpiece contact (safety element) and trigger. Do not use tool if workpiece contact or trigger sticks or binds. l Routine lubrication is not necesR sary. Do not oil.
Troubleshooting Identificación de Fallas Dépannage English Español Français WARNING ALERTA Repairs other than those described here should be performed only by trained, qualified personnel. Contact SENCO for information at 1-800-543-4596. Las reparaciones, fuera de aquellas descritas aquí, deben de ser llevadas a cabo solamente por personal entrenado y calificado. Póngase en contacto con SENCO para información 1-800-543-4596.
Specifications Especificaciones Specifications English Español Français Technical Specifications Minimum to maximum operating pressure Air Consumption (60 cycles per minute) Air Inlet Maximum Speed (cycles per second) Weight Fastener Capacity Tool size: Height Tool size: Length Tool size: Width: Main Body SLS20 70–120 psi 1.92 scfm ¼ in.NPT 10 2.5 lbs 168 8 ½ in. 12 in. 2 in.
Specifications Especificaciones Specifications English Español Français SLS20XP / SLS25XP MODEL: 490003N, 490004N, 490005N, 490006N, 820003N, 820004N MODEL: 490007, 490008, 490013, 490014 MODEL: 820007N, 820008N 3 /8” 9,5 mm .050” 1,3 mm /4” 6,4 mm .050” 1,3 mm 1 A A .044” 1,1 mm .
Accessories Accesorios Accessoires English Español Français SENCO offers a full line of accessories for your SENCO tools, including: l Air Compressors l Hose l Couplers l Fittings l Safety Glasses l Pressure Gauges l Lubricants l Regulators l Filters For more information or a complete illustrated catalogue of SENCO accessories, ask your representative for #MK336.
Limited Warranty SENCO® Pneumatic, DuraSpin®, Cordless Tools & Compressors Senco Products, Inc. (“SENCO”) designs and constructs its products using the highest standards of material and workmanship.