Technical data

--- 13 ---
8-3. Operation Principle
(1) When the compressed air source (air hose) is connected to the nailer:
Fig. 4
Air pressure is applied to the lower surfaces of the
flanges located at the center portion of the cylinder,
forcing the cylinder upward. The compressed air is
thereby blocked from the upper end of the cylinder,
and no pressure is applied to the Piston.
The accumulator is filled with
compressed air.
The trigger and pushing lever are not
operated, and remain closed.
The exhaust vents are open, and no air
pressure is applied to the valve and feed
piston air passage.