Technical data

--- 30 ---
Fig. 15 Disassembly and reassembly of the magazine section
(b) Reassembly
Disassembly procedures should be followed in the reverse order. Note the following points.
Bend the tip of the Cover [105] and engage it with the convex portion of Magazine [81]. Hold it with
Guard [80] positioning the Cover [105] outside Guard [80].
Pin [82]
Feeder Shaft Ring [83]
Hex. Socket Hd. Bolt
M5 x 20 [100]
Nylon Nut M5 [78]
Magazine [81]
Nylon Nut M5 [78]
Sleeve [79]
Body (B) [27]
Guard [80]
Holder Shaft [89]
Ratchet Spring [86]
Nail Holder [87]
Roll Pin D2.5 x 18 [88]
Spring [90]
Pin [82]
Magazine Cover [84]
Holder Cap [85]
Cover [105]
Fit hole of the Cover [105] between
the convex portion of Magazine [81]
and the concave portion of Guard [80].
Concave
portion
Machine Screw M5 x 25 [44]