Technical data

--- 4 ---
5-2. Nail Selection
The Model NV 83A2 utilizes common round-head nails collated by wire or sheet into coils from 200 to 300 pieces.
Applicable nail dimensions are shown below. However, it is recommended to use genuine HITACHI nails to
ensure satisfactory driving quality.
CAUTION: Ensure that nails are as specified in Fig. 1. Other nails will cause clogging of nails and
subsequent damage to the nailer.
NOTE: Aluminum nails may bend when driven into a hard workpiece. Test before use.
6 mm
(.236")
50 mm (2")
Min.
Fig. 1 Dimensions of nails
Max.
7.2 mm
(.283")
2.5 mm
(.099")
3.3 mm
(.131")
Wire-collated nails
83 mm (3-1/4")