Operation Manual

EN-9
Electric Coffee Grinder
SCG 2050RD / SCG 2051BK / SCG 2052WH
EN
11/2016
Copyright © 2016, Fast ČR, a.s.
CLEANING AND MAINTENANCE
• Before cleaning it, make sure that the coffee grinder is turned off, disconnected from the power
socket and that the grinding blade A3 is not moving.
• Wash the lid A1 using warm water with kitchen detergent. Then rinse it with clean water and dry
thoroughly with a fine wiping cloth.
• Remove any remaining ground coffee or remains of other foodstuffs that you processed from the
hopper A2. Thoroughly clean the hopper A2 and the grinding blade A3 with a clean lightly
dampened wiping cloth and then wipe dry.
Attention:
When cleaning the grinding blade A3, be very careful not to injure yourself on the sharp edge.
• Use a dry or lightly dampened wiping cloth for cleaning the base unit A4. Do not rinse it under
running water or submerge it in water or another liquid.
• Do not use thinners, solvents or cleaning agents that cause abrasion, etc. to clean the product.
STORAGE
• When not using the appliance, store it in a dry place out of children's reach. Wind up the power cord
into the storage area A7 and close the lid A1 so that dust does not accumulate inside the hopper
A2.
TECHNICAL SPECIFICATIONS
Rated voltage range ....................................................................................................................... 220−240 V
Rated frequency ................................................................................................................................ 50/60 Hz
Rated power input .................................................................................................................................150 W
Safety class (for electric shock protection) ....................................................................................................II
Noise level .......................................................................................................................................... 85 dB(A)
The declared noise emission level of the appliance is 85 dB(A), which represents a level A of acoustic
power with respect to a reference acoustic power of 1 pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
Changes to text and technical parameters are reserved.