User`s manual

EN - 8

Sleep / Nap Timer period circle as follow:

ADJUST VOLUME

While listening, press + VOLUME – to adjust volume.

ADJUST DISPLAY BRIGHTNESS

Press and hold DIMMER for 2 seconds repeatedly to select high

or low brightness levels.

BATTERY BACK-UP

(For Temporary Time Storage Only)

Install 2 x LR06, AA or EU-3 battery (not included) according

to polarity shown inside the battery compartment. In the event

of a power interruption, your set will not work normally from the

mains supply but there is now the advantage that your clock will

continue to work. The clock display will not light up, as the clock

time will be held in the memory. This also enables you to move

the set from place to place without re-setting the clock every

time. The battery back-up system is only meant to be used from

short temporary power interruption. For longer durations, the

battery may become exhausted or there may be some deviation

in accuracy. When the battery is exhausted, it should be

removed from the set to prevent leakage. If you do not wish to

take advantage of the battery back-up system, your set will work

normally without a battery. However, if disconnected from the

mains, the clock ﬁ gures will ﬂ ash when the mains are