User manual

MRD 3187B User Manual
Page 111
RDS1 Serv Setup
Audio3 PID :0x0036
Audio4 PID :0x0037
►DlbyE1 PID :0x0000
RDS1 Serv Setup
Video PID :0x0031
Audio1 PID :0x0034
►Audio2 PID :0x0000
RDS1 Serv Setup
Audio1 PID :0x0034
Audio2 PID :0x0035
►Audio3 PID :0x0000
RDS1 Serv Setup
Audio2 PID :0x0035
Audio3 PID :0x0036
►Audio4 PID :0x0000
Audio 2 PID
1. Use the and buttons to move
the cursor to, “Audio2 PID:” then press
the button.
2. Use the and buttons to select
the column to edit and use the and
buttons to set the PID, then press
the button to save the selection.
Audio 3 PID
Note: This menu is only available if the unit is
equipped with a second decoder in
Configuration 1.
1. Use the and buttons to move
the cursor to, “Audio3 PID:” then press
the button.
2. Use the and buttons to select
the column to edit and use the and
buttons to set the PID, then press the
button to save the selection.
Audio 4 PID
Note: This menu is only available if the unit is
equipped with a second decoder in
Configuration 1.
1. Use the and buttons to move
the cursor to, “Audio4 PID:” then press
the button.
2. Use the and buttons to select
the column to edit and use the and
buttons to set the PID, then press the
button to save the selection.
DolbyE 1
Note: This option is only available if there is
an 8707A audio output card installed.
1. Use the and buttons to move
the cursor to, “DlbyE1 PID:” then press
the button.
2. Use the and buttons to select