User manual

MRD 3187B User Manual
Page 35
Overlay 1
Type:Table
Overlay:PSI PMT
►Screen Interaction
Overlay 1
Type:Table
►Overlay:PSI PMT
Screen Interaction
Overlay 1
Type:Closed Caption
Overlay:NTSC
►NTSC Srvc:1
Overlay 1
Type:Closed Caption
Overlay:DTVCC
►DTVCC Srvc:1
1. Use the and buttons to move the
cursor to, “NTSC Srvc:” then press the
button.
2. Use the and buttons to select
which NTSC CC Srvc to display on the
overlay (1-4), then press the button to
save the selection.
DTVCC Service
Note: This menu is only available when the
“Overlay” setting is set to DTVCC.
1. Use the and buttons to move the
cursor to, “DTVCC Srvc:” then press the
button.
2. Use the and buttons to select which
DTVCC Srvc to display on the overlay (1-7),
then press the button to save the
selection.
Overlay (Table)
Note: This menu changes depending on which
overlay is set in “Type of Overlay” above.
1. Use the and buttons to move the
cursor to, “Overlay:” then press the
button.
2. Use the and buttons to select the
appropriate type of overlay (PSI PAT, PSI
PMT, PSIP MGT, PSIP STT, PSIP
TVCT, PSIP EIT, PSIP EPG), then press
the button to save the selection.
Screen Interaction
This mode allows the user to page through the OSD
PSI/PSIP tables.
Note: This option will only be available if the type
of overlay is set to, “Table.”
1. Use the and buttons to move the
cursor to, “Screen Interaction,” then
press the button.
2. While this mode is enabled, the , ,
, and buttons will control the on-