User manual

MRD 3187B User Manual
Page 91
MPEG/IP 1-3
►Transmit:Enabled
IP:000.000.000.000
Dest Port:00000
MPEG/IP 1-3
Transmit:Enabled
►IP:000.000.000.000
Dest Port:00000
MPEG/IP 1-3
Transmit:Enabled
IP:000.000.000.000
►Dest Port:00000
MPEG/IP 1-3
Transmit 1
►Transmit 2
Transmit 3
MPEG/IP 1-3
►Transmit:Enabled
IP:000.000.000.000
Dest Port:00000
MPEG/IP 1-3
IP:000.000.000.000
Dest Port:00000
►RTP:Enabled
4. Use the and buttons to change the
selection to, “Enabled,” then press the
button to save the selection.
IP
1. Use the and buttons to move the
cursor to, “IP:” then press the button.
2. Use the and buttons to select the
column to edit and use the and
buttons to change the IP, then press the
button to save the selection.
Destination Port
1. Use the and buttons to move the
cursor to, “Dest Port:” then press the
button.
2. Use the and buttons to select the
column to edit and use the and
buttons to change the destination port (1025 –
65536), then press the button to save the
selection.
RTP
1. Use the and buttons to move the
cursor to, “RTP:” then press the button.
2. Use the and buttons to enable or
disable RTP, then press the button to
save the selection.
Transmit 2
To enable “Transmit 2” as an output use the following
steps:
1. Use the and buttons to move the cursor
to, “Transmit 2,” then press the button.
2. Press the button one more time to get to the
Edit screen.
3. Use the and buttons to move the cursor
to, “Transmit:” then press the button.
4. Use the and buttons to change the
selection to, “Enabled,” then press the
button to save the selection.