User Manual

SF-300CB

13/14

SendFar is the registered trademark of SendFar Technology Co., Ltd..

Appendix A

The purpose of this Appendix is to describe a SNMP proprietary MIB for the SendFar SF-

300 Wireless Access Bridge.

This MIB Module defines SendFar implementation-specific metrics useful in managing

IEEE 802.11 on SendFar boxes. This is to be used as a supplement to the standard 802.11

MIB proposed by IEEE.

Information contained in the MIB elements defined in this module is affected by the Web

configuration, except where it is explicitly noted to the contrary.

Parameter Definition Table:

Name Syntax Access

Status Information

ConnectedToSSID Octet String read-only

UsingChannel Integer read-only

AccessPointMACAddress Octet String read-only

CurrentTransmissionRate Integer read-only

CurrentLinkQuality Integer read-only

ClientBridgeMACAddress Octet String read-only

CurrentIPAddress IP Address read-only

LinkUpIndicator Integer read-only

Firmware Version Octet String read-only

Counters

ReceivedPacketsGoodCount Counter 32 read-only

ReceivedPacketsBadCount Counter 32 read-only

SentPacketsGoodCount Counter 32 read-only

SentPacketsBadCount Counter 32 read-only

BootCount Counter 32 read-only

Privacy Settings

WEPEnabled Integer read-write

WEPKeyLength Integer read-write

WEPKey Octet String read-write

WEPKeyNumber Integer read-write

DenyUnencriptedData Integer read-write

System / IP settings

OperationMode Integer read-write

IPAddress IP Address read-write

SubnetMask IP Address read-write

IpGateway IP Address read-write

DeviceName Octet String read-write

WEB Administrator Settings

UserName Octet String read-write

Password Octet String read-write

System Management

SysConfigSave Integer read-write