User's Manual

Wireless Mini-PCI Card Version: 0.9
Page 10 of 26
5. Make sure that you do not see a yellow (?) or a red (X) next to the PC card
(IEEE 802.1g WLAN 11g network adaptor 802.11g Adapter). If you do see a
(?) or (X) you would need to uninstall the drivers, and reinstall them again. In
order to uninstall the drivers refer to section 2.6 Uninstall Client Utility.
2.4 Disable Windows SSID/WEP Configuration
In order to configure SSID and WEP settings from the Client Utility, you must first
disable the Windows based SSID and WEP configuration from the Network
Configuration in the Control Panel. Follow the steps below in order to disable the
SSID and WEP on Windows.
1. Click on Start > Settings > Control Panel.
2. Double click on the Network Connections icon.
3. Right-click on the wireless network connection for the PC card, and then
select Properties. The icon may look similar to the image below.
After you click on Properties, the Wireless Network Connection Properties
window will appear, as the image depicts below: